Vehicledecontamination
Fully developed and field-tested. Survey, pre-wet, apply, hold contact time, rinse, and monitor. Configurable for any military truck, APC, or combat vehicle fleet.
Vehicle Decontamination Drill In-Headset
Watch the complete unedited decontamination run executed live in VR on YouTube. Follow the six core protocol phases from radiological and agent survey, high-pressure pre-wet, active chemical foam application, dwell time adherence, wash-off, and final clean-line clearance.
- 01 Survey
- 02 Pre-wet
- 03 Apply foam
- 04 Contact dwell
- 05 Rinse
- 06 Release
Six steps — No shortcuts
Water alone does not clear a persistent agent. Contamination comes off only where decontaminant was applied and held for its contact time.
- 01
Survey
Walk the vehicle with the monitor. Find the agent — not where you assume it is.
- 02
Pre-wet
Knock down loose contamination before chemistry goes on. Pressure and distance matter.
- 03
Apply decontaminant
Full coverage, bottom-up, no dry patches. Every square touched is recorded.
- 04
Contact time
The decontaminant needs time to work. Rinse early and the agent is still there.
- 05
Rinse
Clear the chemistry without re-spreading what it broke down.
- 06
Monitor & release
Prove it is clean. Only a clear reading releases the vehicle to the clean side.
Scored the moment the run ends
- Step order
- Surface coverage
- Contact time
- Timeline replay
- Instructor view
Next bayPDSPersonnel Decontamination SystemEnter 
